How to install Ansible in Windows 10 WSL Windows Subsystem for Linux - Ansible install

How to install and maintain Ansible inside Windows 10 using the Windows Subsystem for Linux and Ubuntu 20.04 LTS.

October 25, 2021

Access the Complete Video Course and Learn Quick Ansible by 200+ Practical Lessons

#ansible #install #windows #wsl #ubuntu #operating-system #installation #linux #apt

How to install Ansible in Windows 10. Today we’re going to talk about the easier way to install and maintain Ansible inside Windows 10 using the Windows Subsystem for Linux. I’m Luca Berton and welcome to today’s episode of Ansible Pilot.

How to install Ansible in Windows 10

Today we’re talking about How to install Ansible in Windows 10. Officially Windows is not a supported operating system for the control node even if RedHat is working really hard to eliminate barriers to native Windows controllers. The reason behind this is that there are a lot of UNIX-isms deeply baked into most of Ansible that prevents it from working on native Windows, basically, Windows doesn’t have the fork() syscall implementation. Ansible controller worker model as of 2.10 makes heavy use of the POSIX fork() syscall.

Cygwin Some people used Cygwin POSIX-compatibility projects but sometimes it just breaks so it’s not a reliable solution.
Windows Subsystem for Linux

The best alternative is to use Windows Subsystem for Linux, also known as WSL. Run WSL version 2 if Windows 10 later than build 2004 or Windows 11. Ansible works great on WSL and WSL2.

demo

Let’s jump in a quick live demo of how to install the latest and a specific version of Ansible in Windows using Windows Subsystem for Linux. You must be running Windows 10 version 2004 and higher (Build 19041 and higher) or Windows 11.

code

install_wsl.ps1

wsl --help
wsl --list -o
wsl --install

execution

output

install WSL

Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.
Try the new cross-platform PowerShell https://aka.ms/pscore6
PS C:\Users\user> wsl --install
Installing: Virtual Machine Platform
Virtual Machine Platform has been installed.
Installing: Windows Subsystem for Linux
Windows Subsystem for Linux has been installed.
Downloading: WSL Kernel
Installing: WSL Kernel
WSL Kernel has been installed.
Downloading: Ubuntu
The requested operation is successful. Changes will not be effective until the system is rebooted.
PS C:\Users\user>

setup Ubuntu 20.04 LTS WSL and install ansible

Installing, this may take a few minutes...
Please create a default UNIX user account. The username does not need to match your Windows username.
For more information visit: https://aka.ms/wslusers
Enter new UNIX username: ansiblepilot
New password:
Retype new password:
passwd: password updated successfully
Installation successful!
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
Welcome to Ubuntu 20.04 LTS (GNU/Linux 4.4.0-19041-Microsoft x86_64)
* Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage
System information as of Tue Oct 26 08:11:05 UTC 2021
System load:    0.52      Users logged in:       0
  Usage of /home: unknown   IPv4 address for eth0: 10.0.2.15
  Memory usage:   58%       IPv4 address for eth1: 169.254.106.26
  Swap usage:     0%        IPv4 address for eth1: 192.168.0.202
  Processes:      7
0 updates can be installed immediately.
0 of these updates are security updates.
The list of available updates is more than a week old.
To check for new updates run: sudo apt update
This message is shown once once a day. To disable it please create the
/home/ansiblepilot/.hushlogin file.
ansiblepilot@demo:~$ sudo apt update
Get:1 http://archive.ubuntu.com/ubuntu focal InRelease [265 kB]
Get:2 http://archive.ubuntu.com/ubuntu focal-updates InRelease [114 kB]
Get:3 http://archive.ubuntu.com/ubuntu focal-backports InRelease [101 kB]
Get:4 http://security.ubuntu.com/ubuntu focal-security InRelease [114 kB]
Get:5 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages [970 kB]
Get:6 http://archive.ubuntu.com/ubuntu focal/main Translation-en [506 kB]
Get:7 http://archive.ubuntu.com/ubuntu focal/main amd64 c-n-f Metadata [29.5 kB]
Get:8 http://archive.ubuntu.com/ubuntu focal/universe amd64 Packages [8628 kB]
Get:9 http://archive.ubuntu.com/ubuntu focal/universe Translation-en [5124 kB]
Get:10 http://archive.ubuntu.com/ubuntu focal/universe amd64 c-n-f Metadata [265 kB]
Get:11 http://archive.ubuntu.com/ubuntu focal/multiverse amd64 Packages [144 kB]
Get:12 http://archive.ubuntu.com/ubuntu focal/multiverse Translation-en [104 kB]
Get:13 http://archive.ubuntu.com/ubuntu focal/multiverse amd64 c-n-f Metadata [9136 B]
Get:14 http://archive.ubuntu.com/ubuntu focal-updates/main amd64 Packages [1298 kB]
Get:15 http://archive.ubuntu.com/ubuntu focal-updates/main Translation-en [269 kB]
Get:16 http://archive.ubuntu.com/ubuntu focal-updates/main amd64 c-n-f Metadata [14.4 kB]
Get:17 http://archive.ubuntu.com/ubuntu focal-updates/restricted amd64 Packages [523 kB]
Get:18 http://archive.ubuntu.com/ubuntu focal-updates/restricted Translation-en [75.0 kB]
Get:19 http://archive.ubuntu.com/ubuntu focal-updates/restricted amd64 c-n-f Metadata [504 B]
Get:20 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 Packages [866 kB]
Get:21 http://archive.ubuntu.com/ubuntu focal-updates/universe Translation-en [186 kB]
Get:22 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 c-n-f Metadata [19.3 kB]
Get:23 http://archive.ubuntu.com/ubuntu focal-updates/multiverse amd64 Packages [24.6 kB]
Get:24 http://archive.ubuntu.com/ubuntu focal-updates/multiverse Translation-en [6856 B]
Get:25 http://archive.ubuntu.com/ubuntu focal-updates/multiverse amd64 c-n-f Metadata [620 B]
Get:26 http://archive.ubuntu.com/ubuntu focal-backports/main amd64 Packages [2568 B]
Get:27 http://archive.ubuntu.com/ubuntu focal-backports/main Translation-en [1120 B]
Get:28 http://archive.ubuntu.com/ubuntu focal-backports/main amd64 c-n-f Metadata [400 B]
Get:29 http://archive.ubuntu.com/ubuntu focal-backports/restricted amd64 c-n-f Metadata [116 B]
Get:30 http://archive.ubuntu.com/ubuntu focal-backports/universe amd64 Packages [5800 B]
Get:31 http://archive.ubuntu.com/ubuntu focal-backports/universe Translation-en [2068 B]
Get:32 http://archive.ubuntu.com/ubuntu focal-backports/universe amd64 c-n-f Metadata [276 B]
Get:33 http://archive.ubuntu.com/ubuntu focal-backports/multiverse amd64 c-n-f Metadata [116 B]
Get:34 http://security.ubuntu.com/ubuntu focal-security/main amd64 Packages [945 kB]
Get:35 http://security.ubuntu.com/ubuntu focal-security/main Translation-en [178 kB]
Get:36 http://security.ubuntu.com/ubuntu focal-security/main amd64 c-n-f Metadata [8844 B]
Get:37 http://security.ubuntu.com/ubuntu focal-security/restricted amd64 Packages [482 kB]
Get:38 http://security.ubuntu.com/ubuntu focal-security/restricted Translation-en [69.2 kB]
Get:39 http://security.ubuntu.com/ubuntu focal-security/restricted amd64 c-n-f Metadata [508 B]
Get:40 http://security.ubuntu.com/ubuntu focal-security/universe amd64 Packages [647 kB]
Get:41 http://security.ubuntu.com/ubuntu focal-security/universe Translation-en [106 kB]
Get:42 http://security.ubuntu.com/ubuntu focal-security/universe amd64 c-n-f Metadata [12.7 kB]
Get:43 http://security.ubuntu.com/ubuntu focal-security/multiverse amd64 Packages [21.9 kB]
Get:44 http://security.ubuntu.com/ubuntu focal-security/multiverse Translation-en [4948 B]
Get:45 http://security.ubuntu.com/ubuntu focal-security/multiverse amd64 c-n-f Metadata [540 B]
Fetched 22.1 MB in 8s (2745 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
243 packages can be upgraded. Run 'apt list --upgradable' to see them.
ansiblepilot@demo:~$ sudo apt install ansible
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  ieee-data python3-argcomplete python3-crypto python3-dnspython python3-jmespath
  python3-kerberos python3-libcloud python3-lockfile python3-netaddr python3-ntlm-auth
  python3-requests-kerberos python3-requests-ntlm python3-selinux python3-winrm
  python3-xmltodict
Suggested packages:
  cowsay sshpass python-lockfile-doc ipython3 python-netaddr-docs
The following NEW packages will be installed:
  ansible ieee-data python3-argcomplete python3-crypto python3-dnspython python3-jmespath
  python3-kerberos python3-libcloud python3-lockfile python3-netaddr python3-ntlm-auth
  python3-requests-kerberos python3-requests-ntlm python3-selinux python3-winrm
  python3-xmltodict
0 upgraded, 16 newly installed, 0 to remove and 243 not upgraded.
Need to get 9643 kB of archives.
After this operation, 90.2 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://archive.ubuntu.com/ubuntu focal/main amd64 python3-crypto amd64 2.6.1-13ubuntu2 [237 kB]
Get:2 http://archive.ubuntu.com/ubuntu focal/main amd64 python3-dnspython all 1.16.0-1build1 [89.1 kB]
Get:3 http://archive.ubuntu.com/ubuntu focal/main amd64 ieee-data all 20180805.1 [1589 kB]
Get:4 http://archive.ubuntu.com/ubuntu focal/main amd64 python3-netaddr all 0.7.19-3 [235 kB]
Get:5 http://archive.ubuntu.com/ubuntu focal/universe amd64 ansible all 2.9.6+dfsg-1 [5794 kB]
Get:6 http://archive.ubuntu.com/ubuntu focal/universe amd64 python3-argcomplete all 1.8.1-1.3ubuntu1 [27.2 kB]
Get:7 http://archive.ubuntu.com/ubuntu focal/main amd64 python3-jmespath all 0.9.4-2 [21.3 kB]
Get:8 http://archive.ubuntu.com/ubuntu focal/universe amd64 python3-kerberos amd64 1.1.14-3.1build1 [22.6 kB]
Get:9 http://archive.ubuntu.com/ubuntu focal/main amd64 python3-lockfile all 1:0.12.2-2ubuntu2 [14.6 kB]
Get:10 http://archive.ubuntu.com/ubuntu focal/universe amd64 python3-libcloud all 2.8.0-1 [1403 kB]
Get:11 http://archive.ubuntu.com/ubuntu focal/universe amd64 python3-ntlm-auth all 1.1.0-1 [19.6 kB]
Get:12 http://archive.ubuntu.com/ubuntu focal/universe amd64 python3-requests-kerberos all 0.12.0-2 [11.9 kB]
Get:13 http://archive.ubuntu.com/ubuntu focal/universe amd64 python3-requests-ntlm all 1.1.0-1 [6004 B]
Get:14 http://archive.ubuntu.com/ubuntu focal/universe amd64 python3-selinux amd64 3.0-1build2 [139 kB]
Get:15 http://archive.ubuntu.com/ubuntu focal/universe amd64 python3-xmltodict all 0.12.0-1 [12.6 kB]
Get:16 http://archive.ubuntu.com/ubuntu focal/universe amd64 python3-winrm all 0.3.0-2 [21.7 kB]
Fetched 9643 kB in 2s (4937 kB/s)
Selecting previously unselected package python3-crypto.
(Reading database ... 31836 files and directories currently installed.)
Preparing to unpack .../00-python3-crypto_2.6.1-13ubuntu2_amd64.deb ...
Unpacking python3-crypto (2.6.1-13ubuntu2) ...
Selecting previously unselected package python3-dnspython.
Preparing to unpack .../01-python3-dnspython_1.16.0-1build1_all.deb ...
Unpacking python3-dnspython (1.16.0-1build1) ...
Selecting previously unselected package ieee-data.
Preparing to unpack .../02-ieee-data_20180805.1_all.deb ...
Unpacking ieee-data (20180805.1) ...
Selecting previously unselected package python3-netaddr.
Preparing to unpack .../03-python3-netaddr_0.7.19-3_all.deb ...
Unpacking python3-netaddr (0.7.19-3) ...
Selecting previously unselected package ansible.
Preparing to unpack .../04-ansible_2.9.6+dfsg-1_all.deb ...
Unpacking ansible (2.9.6+dfsg-1) ...
Selecting previously unselected package python3-argcomplete.
Preparing to unpack .../05-python3-argcomplete_1.8.1-1.3ubuntu1_all.deb ...
Unpacking python3-argcomplete (1.8.1-1.3ubuntu1) ...
Selecting previously unselected package python3-jmespath.
Preparing to unpack .../06-python3-jmespath_0.9.4-2_all.deb ...
Unpacking python3-jmespath (0.9.4-2) ...
Selecting previously unselected package python3-kerberos.
Preparing to unpack .../07-python3-kerberos_1.1.14-3.1build1_amd64.deb ...
Unpacking python3-kerberos (1.1.14-3.1build1) ...
Selecting previously unselected package python3-lockfile.
Preparing to unpack .../08-python3-lockfile_1%3a0.12.2-2ubuntu2_all.deb ...
Unpacking python3-lockfile (1:0.12.2-2ubuntu2) ...
Selecting previously unselected package python3-libcloud.
Preparing to unpack .../09-python3-libcloud_2.8.0-1_all.deb ...
Unpacking python3-libcloud (2.8.0-1) ...
Selecting previously unselected package python3-ntlm-auth.
Preparing to unpack .../10-python3-ntlm-auth_1.1.0-1_all.deb ...
Unpacking python3-ntlm-auth (1.1.0-1) ...
Selecting previously unselected package python3-requests-kerberos.
Preparing to unpack .../11-python3-requests-kerberos_0.12.0-2_all.deb ...
Unpacking python3-requests-kerberos (0.12.0-2) ...
Selecting previously unselected package python3-requests-ntlm.
Preparing to unpack .../12-python3-requests-ntlm_1.1.0-1_all.deb ...
Unpacking python3-requests-ntlm (1.1.0-1) ...
Selecting previously unselected package python3-selinux.
Preparing to unpack .../13-python3-selinux_3.0-1build2_amd64.deb ...
Unpacking python3-selinux (3.0-1build2) ...
Selecting previously unselected package python3-xmltodict.
Preparing to unpack .../14-python3-xmltodict_0.12.0-1_all.deb ...
Unpacking python3-xmltodict (0.12.0-1) ...
Selecting previously unselected package python3-winrm.
Preparing to unpack .../15-python3-winrm_0.3.0-2_all.deb ...
Unpacking python3-winrm (0.3.0-2) ...
Setting up python3-lockfile (1:0.12.2-2ubuntu2) ...
Setting up python3-ntlm-auth (1.1.0-1) ...
Setting up python3-kerberos (1.1.14-3.1build1) ...
Setting up python3-xmltodict (0.12.0-1) ...
Setting up python3-jmespath (0.9.4-2) ...
/usr/lib/python3/dist-packages/jmespath/visitor.py:32: SyntaxWarning: "is" with a literal. Did you mean "=="?
  if x is 0 or x is 1:
/usr/lib/python3/dist-packages/jmespath/visitor.py:32: SyntaxWarning: "is" with a literal. Did you mean "=="?
  if x is 0 or x is 1:
/usr/lib/python3/dist-packages/jmespath/visitor.py:34: SyntaxWarning: "is" with a literal. Did you mean "=="?
  elif y is 0 or y is 1:
/usr/lib/python3/dist-packages/jmespath/visitor.py:34: SyntaxWarning: "is" with a literal. Did you mean "=="?
  elif y is 0 or y is 1:
/usr/lib/python3/dist-packages/jmespath/visitor.py:260: SyntaxWarning: "is" with a literal. Did you mean "=="?
  if original_result is 0:
Setting up python3-requests-kerberos (0.12.0-2) ...
Setting up ieee-data (20180805.1) ...
Setting up python3-dnspython (1.16.0-1build1) ...
Setting up python3-selinux (3.0-1build2) ...
Setting up python3-crypto (2.6.1-13ubuntu2) ...
Setting up python3-argcomplete (1.8.1-1.3ubuntu1) ...
Setting up python3-requests-ntlm (1.1.0-1) ...
Setting up python3-libcloud (2.8.0-1) ...
Setting up python3-netaddr (0.7.19-3) ...
/usr/lib/python3/dist-packages/netaddr/strategy/__init__.py:189: SyntaxWarning: "is not" with a literal. Did you mean "!="?
  if word_sep is not '':
Setting up python3-winrm (0.3.0-2) ...
Setting up ansible (2.9.6+dfsg-1) ...
Processing triggers for man-db (2.9.1-1) ...
ansiblepilot@demo:~$ ansible --version
ansible 2.9.6
  config file = /etc/ansible/ansible.cfg
  configured module search path = ['/home/ansiblepilot/.ansible/plugins/modules', '/usr/share/ansible/plugins/modules']
  ansible python module location = /usr/lib/python3/dist-packages/ansible
  executable location = /usr/bin/ansible
  python version = 3.8.2 (default, Mar 13 2020, 10:14:16) [GCC 9.3.0]

code with ❤️ in GitHub

Recap

Now you know how to install the latest version of Ansible in Windows 10 using the Windows Subsystem for Linux. Subscribe to the YouTube channel, Medium, and Website, X (formerly Twitter) to not miss the next episode of the Ansible Pilot.